Warning light with optional warning siren
Tellflash
The warning light for corridors, stairwells and rooms with high noise levels (e.g. gym, workshop, school kitchen). It switches on as soon as someone anywhere in the building raises the alarm on a Tellfire.
- 24 RGB LEDs
- Optional siren
- LoRaWAN
- Swiss made

Overview
A warning light with an optional warning siren for corridors, stairwells and noisy rooms.
Tellflash provides the visual building warning when a connected Tellfire is activated. A version with a powerful warning siren (up to 105 dB) is also available.
The unit has 24 high-intensity LEDs and communicates with Tellfire via LoRaWAN. We configure the colours and flash patterns for the agreed alarm procedure.
- 24 high-intensity RGB LEDs
- Optional warning siren (up to 105 dB)
- Remotely configurable colours and flash patterns
- Connected to Tellfire via LoRaWAN, always ready to receive
- Powered from a wall socket, power supply and cable included
- Developed and manufactured in Switzerland
When the alarm goes off
How Tellflash warns the building.
When a connected Tellfire is activated, the configured Tellflash units display the agreed warning pattern. Units with a warning siren also give an audible warning.
- 1
Alarm on the Tellfire
Someone presses the Tellfire SOS button, starting the fire service call and the building warning.
- 2
Radio signal
The Tellfon system sends a command via LoRaWAN to every Tellflash in the building. The units are always ready to receive.
- 3
Light and sound
Each configured Tellflash displays the agreed colour and flash pattern. On units with a siren, the audible warning is also activated.
Mounting locations
Locations where the warning needs to be seen or heard.
Tellflash belongs wherever the alarm has to be seen, including by people who are not in their own room at the time.
Tellflash is mounted on the wall and plugged into an ordinary socket. The power supply and cable are included, and no data cabling is needed. We agree with you which colours and patterns light up in an alarm, and can change them remotely later on.
Corridors and hallways
Clearly visible on the routes between rooms.
Stairwells
So the warning reaches every floor.
Sports hall and assembly hall
Large rooms that can get noisy.
Changing rooms and side rooms
Rooms without a Tellfire of their own where people still spend time.
In detail
Technical data
We tailor the exact configuration to your building and your procedures during planning.
- Warning
- 24 high-intensity RGB LEDs; optional warning siren (up to 105 dB)
- Radio
- LoRaWAN 1.0.3, Class C, always ready to receive
- Receiver sensitivity
- −137 dBm
- Power
- Micro-USB, 5 V / 1 W; power supply and 2 m cable included
- Dimensions and weight
- 124 × 124 × 39 mm, 300 g
- Housing
- Plastic (ABS)
- Operating conditions
- 0 to 80 °C, 0 to 95 % relative humidity, non-condensing
- Versions
- Warning light only or warning light with warning siren (up to 105 dB)
- Conformity markings
- CE (RED 2014/53/EU), UKCA
FAQ
Questions about Tellflash
Does Tellflash need power?
Yes. Tellflash runs on a USB power supply plugged into an ordinary socket; the power supply and a 2 m cable are included. During the site visit, we plan the mounting locations so that there is a socket nearby.
Do cables need to be run to the Tellfire?
No data cable is required between Tellfire and Tellflash: they communicate via LoRaWAN. We check radio coverage at the planned locations during the site assessment. Tellflash still needs a power socket.
Does Tellflash have a siren?
There are two versions: warning light only, or warning light with a powerful warning siren (up to 105 dB). We select the appropriate version during the site assessment, in line with the agreed fire safety arrangements.
Can the colours and patterns be adjusted?
Yes. Colours and flash patterns are freely configurable, from a discreet status indicator to a full alarm. We make changes remotely, without anyone needing to be on site.
How many Tellflash units does a building need?
The required number depends on the floor plan, visibility, sound requirements and how the building is used. We determine device locations and coverage during the site assessment.
Which conformity markings does Tellflash carry?
Tellflash carries CE and UKCA markings. The applicable conformity information is provided in the product documentation.
More products
Related products
Considering Tellflash for your organisation?
We discuss your requirements and provide an itemised quote for the equipment and services you need.



